Threading For Twin Needle - Husqvarna Viking Designer topaz 25 User Manual

THREADING FOR TWIN NEEDLE

Press the ON/OFF switch to "O".
1. Insert a twin needle.
2. Use a second thread spool or wind a bobbin with the
thread you are going to use as the second upper thread.
3. Lift the spool pin up and all the way to the right. Lock
the spool pin in the vertical position by slightly pressing
medium size spool cap, place a felt pad under the thread
spool.
should rotate in a clockwise direction when the thread reels
off the spool.
5. Left needle: Thread the machine as described on page 15.
Check to ensure that the thread lies between the left thread
6. Pull out the auxiliary spool pin and slide on a spool cap.
A
B
Note: Only use symmetrical twin needles (C).
Do not use this type of twin needle (D), since
it may damage your sewing machine.
felt pad under the thread spool.
7. Place the second thread on the spool pin. The second
spool should rotate in a counterclockwise direction when the
thread reels off the spool.
8. Right needle: Thread the machine as before but this thread
needle manually.
Note: If using specialty threads (such as metallic threads) its weight and
irreglular surface increases the thread tension. By reducing the tension, the
risk of needle breakage is prevented.
D
C
S U 17
ET P