Unpacking; Connect The Power Cord And Foot Control; Connecting The Foot Control Cord - Husqvarna Viking Designer topaz 25 User Manual

UNPACKING

packaging and lift off the cover.
2. Remove the packing material and the foot control.
3. The machine is delivered with an accessory bag, a power
cord and a foot control cord.
4. Wipe the machine, particularly around the needle and
stitch plate to remove any soil before sewing.
Note: Your HUSQVARNA VIKING
25 sewing and embroidery machine is adjusted to provide the best stitch
result at normal room temperature. Extreme hot and cold temperatures
can affect the sewing result.

CONNECTING THE FOOT CONTROL CORD

the power cord. Connecting the foot control cord to the foot
use the machine.
1. Take out the foot control cord. Turn the foot control
over. Connect the cord to the socket inside the space of
connected.
2. Lay the cord in the slot on the underside of the foot
control.
CONNECT THE POWER CORD AND
FOOT CONTROL
Note: Before plugging in the foot control, check to ensure that it is of type
"FR2" (see underside of foot control).
1. Connect the foot control cord to the front socket on the
2. Connect the power cord to the rear socket on the bottom
For the USA and Canada
the proper outlet. Do not modify the plug in any way.
12
DESIGNER TOPAZ
® ™
1
3
2
1 2