ECS P5TX-Apro User Manual page 85

P5TX–Apro User's Manual
4: Reference Information – 4.41
If you set this option to 'Disabled', the 'Onboard Parallel Mode'
option below will not appear on the screen.
Onboard Parallel Mode
Selects the parallel port mode. The setting options are:
SPP (default)
ECP/EPP
EPP/SPP
ECP
If you set this option to 'SPP' or 'EPP/SPP', the 'ECP Mode
Use DMA' option will not appear on the screen. If you set this
option to 'SPP' or 'ECP', the 'Parallel Port EPP Type' option will
not appear on the screen.
ECP Mode Use DMA
Selects the ECP Mode DMA channel. The setting options are:
3 (default)
1
Parallel Port EPP Type
Sets the EPP protocol version. The setting options are:
EPP 1.7 (default)
EPP 1.9