ECS P5TX-Apro User Manual page 67

P5TX–Apro User's Manual
4: Reference Information – 4.23
Swap Floppy Drive
This switches the floppy drive assignments so that drive A is
treated as drive B: and drive B: as drive A: under DOS. The de-
fault setting is Disabled.
Boot Up NumLock Status
This item allows you to select which mode the numeric key-
pad on an IBM-compatible extended keyboard is set to when the
computer boots up. The options are:
On – Numeric keypad mode
Off – Cursor control mode
Security Option
This sets when password protection is active. The two op-
tions are:
System – Password required at boot up
Setup – Password controls access to Setup utility
You create a password using the Password Setting option in
the main menu. If no password is set, the system ignores this
item.
(Default)