ECS P5TX-Apro User Manual page 50

P5TX–Apro User's Manual
4: Reference Information – 4.6
Onboard Connectors
Name Function
J1 Keyboard & Mouse
J3 Serial Port One
J4 Serial Port Two
J6 Parallel Port
J7 Floppy Drive Controller 34-pin connector connects to 2-device cable;
J8 First IDE Channel
J9 Second IDE Channel
J10 Case Features
J11 USB Port 1 & Port 2
J12 FIR header (optional)
J13 IrDA header
J14,16,17 CPU Fan power
J18 Intrusion Detector
J19 Modem Ring Wake-up Connects to internal modem for system wake-up on
PS1 ATX Power
PS2 AT Power
Description
Stacked PS/2 ports, keyboard lower, mouse upper
Onboard 9-pin serial port is COM1, can be set to COM3
Onboard 9-pin serial port is COM2, can be set to COM4
Standard 25-pin parallel Printer port
End device is Drive A:, middle is Drive B:
40-pin connector connects to 2-device cable;
End device is Primary Master, middle is Slave
40-pin connector connects to 2-device cable;
End device is Secondary Master, middle is Slave
Connects to case features:
Pin 1-3: Power On LED; Pin 4-5: Suspend Switch;
Pin 6-8:Suspend LED; Pin 9-10: Reset Switch
Pin 11-12: Keyboard Lock; Pin 13-16: Speaker
Pin 17-18: Hard Disk LED; Pin 19-20: Power Switch
Stacked Universal Serial Bus ports
Connects to optional Fast IR infrared module cable
Connects to optional IrDA infrared module cable
Connect to green cooling fan power cable
Connects to chassis intrusion cable
modem ring
Connects to 20-pin ATX power supply lead
Connects to standard power supply leads P8 and P9