ECS P5TX-Apro User Manual page 14

P5TX–Apro User's Manual
2: Using Your Mainboard – 2.2
Hardware Control & Indicator Connectors
Feature
Power Status LED
Suspend Switch
Suspend LED
Reset Switch
Keyboard Lock
Speaker
HDD Activity LED
Power Switch
J10 Pins Function
1-3 When lighted indicates that system is turned on
Pin 1: + ; Pin 2: + ; Pin 3: –
4-5 Puts the system into Suspend state under Operating
Systems that support this power management feature
6-8 When lighted indicates the system is suspended
Pin 1: + ; Pin 2: + ; Pin 3: –
9-10 Pressing the Reset switch restarts the system
11-12 Disables keyboard via a lock mounted on front panel
of the case
13-16 Connects to the PC speaker mounted on the system case
Pin 1: +
17-18 Flashes when hard disk drive is active
Pin 1: + ; Pin 2: –
19-20 Turns the system power on and off. Default sets this
to dual function as power and suspend switch. Press
once for Suspend, hold for >4 seconds for Off. To set as
Power only, change setting in the Power Management
section of the CMOS Setup utility.