ECS P5TX-Apro User Manual page 60

P5TX–Apro User's Manual
4: Reference Information – 4.16
Note:
Due to a technical limitation
in producing the illustration of
this screen, the memory fig-
ures shown are not standard.
Your system will display the
figures for the memory in-
stalled on the mainboard.
Standard CMOS Setup
To enter this section, highlight this menu item in the main
menu and press the Enter key. The screen above will appear.
Menu Commands
If you look at the lower portion of the screen illustration you'll
see a section that lists the control commands for this level of the
program. You execute a command by pressing the key for that
command. The program commands are :
Quit
This command will close the Setup program when you press
the ESC key.
Help
This displays information about the highlighted item when
you press the F10 key.