Adjust Volume; Mute A Call; Turn Off The Handset Ringer; Turn On The Keypad Lock - iDect Link Plus Single User Manual

4.7

Adjust Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the
earpiece and speaker volumes.
During a call:
Press <UP/DOWN> to select volume 1-5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
4.8

Mute a Call

You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <C/MUTE> to mute the microphone and "MUTED" will display on the LCD.
Your caller cannot hear you. Press <C
4.9 Turn off the
In idle, press and hold <HASH/#> to turn off the handset ringer. The "RINGER
OFF" icon is displayed on the LCD.
Note: The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned off
To turn the ringer back on, press and hold <HASH/#> again.
4.10

Turn on the Keypad Lock

You can lock the keypad so that it cannot be used accidentally while carrying it
around. In idle, press and hold <STAR/*> to turn on the keypad lock, and the
<KEY LOCK> icon will display.
Note: You can still use <TALK> to answer a call when the handset is ringing.
To turn the keypad lock off, press and hold <STAR/*> again.
4.11

Redial the last number

You can redial any of the 10 last numbers called. If you have stored a name
in phonebook to go with the
The most recent last number will display at the top of the redial list.
4.11.1 Redial a Number from the Redial List
1. In idle mode, press <DOWN/REDIAL> to access the redial list.
Note: If the redial list entry shows a name, press <Hash/#> to view the number
of this entry.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK> to dial to the selected redial number with home line. OR press
<MOBILE> to dial the selected redial list entry with mobile line.
Note: If there are no numbers in the redial list, the display shows "EMPTY " .
/MUTE
Handset Ringer
number, the name will be displayed instead.
18
> again to unmute the microphone.