Aerobics Silver Select XP Owner's Manual page 12

ASSEMBLY INSTRUCTIONS (cont'd)
Step Nine:
Insert one of the 4" slotted head bolts (20)
through the side rail (19), the side rail bracket
(21) (the foam on the bracket should be at the
top, facing the frame) and finally through the
frame (2). Install a 1" fender washer (22) and
a ¼-20 kep nut (4) to the bolt and hand
tighten. Install the other side rail following the
same procedure. Tighten both side rails with
19
a 7/16" wrench.
20
21
4
22
Step Ten:
Tighten the 4 ¼-20 kep nuts (4) installed
in step one.
These will secure the upright assembly
4
12