Headphones; To Connect And Use Headphones - Bounty Hunter Time Ranger Owenrs Manual

TIP:
You can extend battery life by using headphones. The Time
Ranger™ is equipped with a headphone jack for use with any
1/4" stereo-type headset.
Turn the unit OFF when not in use, and if you do not plan to use
the detector for a week or more, remove the batteries.
For optimum performance, replace the batteries when the BATT
indicator on the LCD display indicates L (Low).

Headphones

The Time Ranger™ is equipped with a stereo headphone jack. Using
headphones (not supplied) with your metal detector not only extends
battery life, but also makes it easier to identify subtle changes in the
threshold levels for better detection results.

To connect and use headphones

1. Insert the headphone 1/4" plug into the headphone jack on the
underside of the control panel, as shown in the following diagram.
2. Set the headphone volume to the lowest setting before you begin
listening; after you begin listening, adjust each volume control to a
comfortable level.
5
POWER
SNIFF
ON/OFF
Headphone
Jack
1/4 inch
Headphone
Plug
PRESET
ALL METAL
SMART BLANKER
TRAC
DISC
TARGET