Quick-Start Demo; Headphone Jack; Using Headphones - Bounty Hunter Platinum Owner's Manual

QUICK-START
VIII. Wave the nickel
a. The nickel will not be detected.
IX. Press the
Then press
a. The word "IRON" reappears on the display
X. Wave the Nail.
a. The nail is now again detected.
b. The nail has been "notched in."
XI. Press
XII. Pass the quarter over the searchcoil.
a. Notice that motion is not required. A motionless object induces a
sound.
b. Notice the single monotone hum. The ALL METAL Mode produces
only this single sound, regardless of the type of metal detected.
c. Move the quarter closer to and farther away from the searchcoil.
Notice the changing depth-display values. The 2-digit depth reading
indicates the distance, in inches, away from the searchcoil.

HEADPHONE JACK

The detector has a 1/4" headphone jack on the left side of the housing.
When the headphone jack is connected, speaker audio is disabled..

USING HEADPHONES

Using a detector with headphones facilitates detection of the weakest signals
and also extends the battery life.
It also allows you to hear subtle changes in the sound more clearly, particularly if
searching in a noisy location. For safety reasons, do not use headphones near
traffic or where other dangers are present. This device is to be used with
interconnecting cables/headphone cables shorter than three meters.
8
to toggle down to NOTCH.
to toggle down to ALL METAL
continued