Touch Pads - Bounty Hunter Time Ranger Owenrs Manual

Touch pads

The detector control panel includes several touch pads as shown
and described in the following table. These touch pads are used to
set detector operation.
POWER
ON/OFF
ALL METAL
SMART
TRAC
SNIFF
BLANKER
DISC
TARGET
PRESET
9
Dectector Touch pads
POWER
SNIFF
ON/OFF
ALL METAL
SMART
TRAC
POWER ON/OFF is used to turn the detector on.
ALL METAL SMART TRAC is used to select the ALL
METAL mode of operation.
SNIFF isused to enable the SNIFF mode of operation.
BLANKER is used to enable the unit's BLANKER
feature.
DISC TARGET is used to select DISCRIMINATION
mode and to "lock in" programmed settings.
PRESET is used to select preset targets in
DISCRIMINATION mode.
ACCEPT and REJECT are used to select customized
or PRESET targets in DISCRIMINATION mode and
to accept or reject targets in SNIFF mode.
DISC
PRESET
TARGET
BLANKER