3.3.20 Idle Gear
(1) Turn the AC power switch off. Unplug the AC power cord from the outlet.
(2)
Remove the main chassis unit (see 3.3.17).
(3)
Remove the motor Assy (see 3.3.19 (1) to (8)).
(4) Remove three screws 1 and then remove motor bracket B (2).
(5) Remove idler gear E (3), idle gear D (4), idle gear B (5), idle gear C (6), idle gear A (7), and two resist
idle gears 8.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OL1200
Chapter 3 Parts Replacement
Page: 55