Table of Contents
Advertisement
3.3.15 Hopping motor
(1) Turn the AC power switch off. Unplug the AC power cable from the outlet.
(2)
Remove the manual feed hopper Assy (see 3.3.4).
(3)
Remove the side cover (R) (see 3.3.5).
(4)
Remove the front feeder Assy (see 3.3.12.(1) to (3)).
(5)
Remove the inner cover and square-shaped connector (see 3.3.13.(5) and (6)).
(6) Remove hopping motor 1 from the square-shaped connector.
(7)
Remove the paper supply guide A (see 3.3.13. (7) to (10)).
(8)
Remove the lever (R) (see 3.3.10. (6)).
(9) Remove two screws 2 and then remove side plate (R) Assy 3.
(10) Remove two screws 4 and then remove hopping motor 1.
Service Guide OL1200
Chapter 3 Parts Replacement
Page: 50
Advertisement
Table of Contents
Troubleshooting
