Table of Contents
Advertisement
Speaker installation
option
Consult a qualified building contractor when
attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers and personal injury.
Attaching to a wall
You can attach all of the speakers (except
subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to
be attached should be capable of supporting
10 kg per screw.
1
Drive a screw (not supplied) into the wall.
A At least 30 mm
B ‰ 4.0 mm
C ‰ 7.0 mm to
‰ 9.4 mm
D Wall or pillar
E 5.5 mm to 7.5 mm
2
Fit the speaker securely onto the screw(s)
with the hole(s).
e.g., [XH166] Surround speaker
DO NOT
≥ In this position, the
speaker will likely fall if
moved to the left or right.
Screwing positions on the
wall
Use the measurements indicated below.
≥ Leave at least 20 mm of space above the
speaker and 10 mm on each side to allow
enough space for fitting the speaker.
[XH105]
CENTER, FRONT, SURROUND
A 41 mm
B 28 mm
16
VQT5F14
DO
≥ Move the speaker so
that the screw is in this
position.
[XH166]
CENTER
A 14 mm
B 65 mm
C 175 mm
FRONT
Attach to a wall without the base and the stand.
D 45 mm
E 53 mm
F 266 mm
≥ Reattaching the speaker cable to the stand
Straighten the
cable and run
through the stand.
Pull out the cable
through the hole.
SURROUND
G 42 mm
H 45 mm
160 mm
Hide quick links:
Advertisement
Table of Contents
