Specifications - Citizen CL-S400DT User Manual

Appendixes

Specifications

Item
Printing
Printing speed
Print mode
*2
Media
Bar code
(for Datamax® emulation)
Description
Printing method Direct thermal
Resolution Main scanning line density: 203 dots/inch (8 dots/mm)
Sub- scanning line density: 203 dots/inch (8 dots/mm)
Head 864 dots (effective dots: 832 dots)
Max. print width 104 mm
Max. print length 812.8 mm
Print density Print density is adjustable with software
Printing speed setting 6, 5, 4, 3 or 2 inches per second.
2-4 inches per second with optional peeler.
Batch mode Normal printing (single or multiple sheets)
Tear off mode Feeds back media to the tear-off position after printing is completed.
*1
Cut mode Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are done.
• Backfeed
• Cut through (Cut through refers to stopping present printing
*1
Peel mode Peels labels from the liners after printing them.
Types of media Roll, fanfold
(continuous thermal media, thermal die-cut media, continuous
thermal tags, continuous thermal tickets)
Kinds of media Thermal-transfer media
*2
Recommended media Heat-transfer media: label media (150LA-1 Ricoh),
tag media (130LHB Ricoh)
Max. media width 118.0 mm
Min. media width 19.5 mm
Min. label width 19.5 mm
*3
Min. label pitch 6.35 mm
Max. media thickness 0.254 mm
Max. media length 812.8 mm
Min. media length 6.35 mm
Min. media thickness 0.0635 mm
On-board roll media Max. external diameter: 127 mm
diameter
Media core: 25.4 to 76 mm
Min. media core external diameter
(when using label media): 50.8 mm
One-dimension • Code 3 of 9 • UPC-A • UPC-E • EAN-13 (JAN-13) • EAN-8 (JAN-8)
• Interleaved 2 of 5 • Code 128 • HIBC (Modulus 43-used code 3 of 9)
• Codabar (NW-7) • Int 2 of 5 (Modulus10-used Interleaved 2 of 5)
• Plessey • Case Code • UPC 2DIG ADD • UPC 5DIG ADD • Code 93
• Telepen • ZIP • UCC/EAN128 • UCC/EAN128 (for K-MART)
• UCC/EAN128 Random Weight • FIM
Two-dimension • UPS Maxi Code • PDF-417 • Data Matrix • QR Code • AztecAztec
• RSS
to cut the previous label when it reaches the cut position. After
cutting, printing restarts but a gap may be created at the seam of
the printing at this time.)
54
4.1 inch
32 inch
4.65 inch
0.77 inch
0.77 inch
0.25 inch
0.01 inch
32 inch
0.25 inch
0.0025 inch
5 inch
1 to 3 inch
2 inch