Citizen CL-S400DT User Manual page 38

Chapter 2 Printer Operation
Mode Settings
[Datamax® Emulation]
Top Menu Sub Menu
Serial Monitor
Auto Calibration
[Auto Cal]
Sensor Monitor
Global –
configuration
[Global Config]
Note: To restore factory default settings, turn on printer power while pushing the MENU and PAUSE keys simultaneously, then press
the FEED key and the STOP key sequentially.
Default Menu
– –
See Through See Through
Reflect
See Through See Through
Reflect
Config Set 1 Config Set 1
Config Set 2
Config Set 3
38
Remarks
Displays the state of the serial interface.
Executes the calibration of the sensor.
Displays the level of the sensor.
Sets the Config Set.