Rear View - Citizen CL-S400DT User Manual

Chapter 1 Setup
Part Names and Functions
Serial Interface (p.57)
Media Width Adjustment (p.49)
Media Thickness Adjustment
(p.48)
Connection to Power (p.16)
USB Interface (p.59)

Rear View

1
2
3
4
1 Media holder bar
The media is supported by the media holder bar when installed in the
printer.
2 Media holder guide
This guide is moved horizontally to match the media size.
The guide can be sliding it from the holder bar.
3 Media holder stand
It is a base to mount the media holder bar.
4 Serial interface (RS232C)
This receives serial transmission of data from a host computer.
5 Media width adjustment dial
It is adjusted to match the width of the media.
6 Media thickness adjustment dial
It is adjusted to match the thickness of the media.
7 Power cord inlet
The connector of the enclosed power cord is connected here.
8 USB interface (USB2.0)
This receives USB transmission of data from a host computer.
Please do not touch the mounting screws on the media holder stand.
By factory default, the media holder stand is adjusted at the optimum
printing position. If the media holder stand needs to be replaced,
please contact the retailer where you purchased the product.
15
Caution
5
6
7
8