Citizen CL-S400DT User Manual page 35

Chapter 2 Printer Operation
Mode Settings
[Datamax® Emulation]
Top Menu Sub Menu
Buzzer Select
Metric/Inch
[Metric/Inch Sel]
Max Media Length
[Max Media Len]
Settings Lock
Keyboard Lock
Standby Mode
Standby Timer
Control Code
Emulation Select
[Emulation Sel]
Emulation Auto
Detect
[Emulation Auto]
After Print AutoConfigure
[Auto Config]
Function Select
[Function Sel]
* Only when peeling option is mounted.
**Only when cutter is mounted.
Default Menu
Exec/Err Exec/Err
All
Error
Key
None
Inch Inch
mm
10.00 inch 1.00 to 50.00 inch
254.0 mm 25. 4 to 1270.0 mm
Off On
Off
Off On
Off
Off On
Off
5 min 1 to 1440 min
STD STD
ALT
ALT-2
DM4 DM4
DMI
DPP
ZPI2
On On
Off
Full Auto
On On
Off
Tear Off
Tear
Peel On*
Cut On**
35
Remarks
Setting buzzer sounding conditions.
Sets the units.
Sets the maximum media length.
Prevents a command changing the set value.
Prevents a change by a key operation.
Hold down the Menu Key for at least 4
seconds to enter the Menu Setup Mode
when setting the "On" menu.
Choose the Standby Mode.
If you switch on the Standby Mode, the
printer will go into power-saving mode after
the elapse of the time set by the Standby
Timer.
You can set the time it takes for the machine
to go into Standby Mode.
Switches command mode of DMX mode.
Selects DataMax®/Zebra® compatibility
DM4: DataMax® 400
DMI: DataMax® IClass
DPP: DataMax® Prodigy Plus®
ZPI2: Zebra® 2844Z
Setting emulation (as above) auto detection.
Automatically configures optional devices.
On . ....AutoConfigure enabled (Regardless
of whether Function Select is set, if a
peeler or cutter is installed, each mode
is set automatically.)
Off ....AutoConfigure disabled (A peeler of
cutter is installed, but to not operate
the peeler or cutter, turn it Off and
the operation is selected by Function
Select.)
Selects the operation when the
AutoConfigure is set to Off. Designates the
paper position based on each option. The
operation of this device is enabled during
selection. At the same time, the parameters
of the f command of Prodigy Plus are
emulated for each optional device.