Pride Mobility Travel Pal Owner's Manual page 35

I X . C A R E
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed and require no subsequent lubrication.
CONSOLE, CHARGER AND ELECTRONICS
! Keep these areas free of moisture.
! If any of these items do become exposed to moisture, let them dry thoroughly before operating your Travel
Scooter again.
STORAGE
If you plan on not using your Travel Scooter for an extended period of time, it is best to:
! Fully charge its batteries prior to storage.
! Store your Travel Scooter in a warm, dry environment.
! Avoid storing your Travel Scooter where it will be exposed to temperature extremes.
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
battery. This damages the battery and can cause personal injury.
For prolonged storage, you may wish to place several boards under the frame of your Travel Scooter to raise it off
of the ground. This takes the weight off the tyres and reduces the possibility of flat spots developing on the areas of
the tyres contacting the ground.
DISPOSAL OF YOUR SCOOTER
Your Travel Scooter must be disposed of according to applicable local and national statutory regulations. Contact
your local waste disposal agency or authorised Pride Dealer for information on proper disposal of packaging,
metal frame components, plastic components, electronics and batteries.
Travel Pal
A N D M A I N T E N A N C E
www.pridemobility.com 35