Installing The Sensor Head - Omron ZFV Series User Manual

Section 2
Sensor Head
■ Removal procedure
Insert a regular screwdriver into the gap (one of the two gaps) between the mounting
fixture and the Sensor Head case, and remove the mounting fixture.

Installing the Sensor Head

This section describes how to install the Sensor Head.
The detection range of the Sensor Head can be confirmed by the guide light. Install so that
the part to be inspected is inside the frame formed by the guide light.
■ Installation distance
The following graphs show the relationship between detection range and setting dis-
tance for each model of Sensor Head.
Values differ according to each model of Sensor Head, so fully check the model before
using these graphs.
Reading graphs
"H" refers to the following width.
• ZFV-SR10
Setting distance L (mm)
100
30
4
ZFV
38
User's Manual
Mounting fixture
Detection
Details of detection range
range
p.84
(H)
Detection range H (mm)
Detection range H
(mm)
5
6
7
8
9
10
Setting distance L
(mm)
34
37
40
44
49