Table of Contents
Advertisement
Settings and information
Operating principle
1
Button for:
>
Selecting display
>
Setting values
2
Button for:
>
Confirming selected display or set val-
ues
>
Calling up computer information
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
You can set units of measure.
iDrive, for operating principle refer to page 16.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
Online Edition for Part no. 01 41 0 014 699 - © 10/07 BMW AG
3
When the lights are on: instrument lighting
brightness
4
Calling up Check Control
5
Setting the time
6
Setting the date
7
Viewing service requirement display
62
4.
Select "Language / Units" and press the
controller.
5.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Units" is selected and press the con-
troller.
88
70
68
70
65
66
Advertisement
Table of Contents
