Table of Contents
Advertisement
3.
Press the
button.
The LED in the button lights up.
4.
Press the desired memory button 1 or 2: the
LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.
Call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ment could result in an
Convenience mode
1.
Unlock and open the driver's door or switch
on radio readiness, refer to page 54.
2.
Briefly press the desired memory button 1
or 2.
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off, refer to page 54.
2.
Press the desired memory button 1 or 2
and keep it pressed until the adjustment
process has been completed.
If the
button was pressed accidentally:
Press the button again; the LED goes out.
Call-up with the remote control
The driver's seat position last stored is stored
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is opened.
When this Personal Profile function is
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the
seat.<
44
Online Edition for Part no. 01 41 0 014 699 - © 10/07 BMW AG
accident.<
The adjusting procedure is halted immediately
when you touch a seat adjustment switch or
one of the memory buttons.
Selecting automatic call-up
iDrive, for operating principle refer to page 16.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
5.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Door locks" is selected and press the
controller.
6.
Select "Central locking" and press the con-
troller.
7.
Select "Last seat pos." and press the con-
troller.
8.
Select "After unlocking" or "After door
opened".
9.
Press the controller.
Switching off automatic call-up
Select "Deactivated" and press the controller.
Advertisement
Table of Contents
