Table of Contents
Advertisement
Turn signals, front
24 watt bulb, PY24W Silver Vision
The turn signal lamp can be changed via a cover
in the wheel arch.
1.
Turn the respective wheel inwards.
2.
Using a coin, turn both locks of the cover all
the way to the left, arrow 1, and remove the
cover.
3.
Turn the lamp holder to the left, arrow 2,
and take it out.
4.
Turn the lamp socket to the right for
removal and replacement.
5.
Insert the lamp holder and lock it by turning
it to the right.
6.
Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
Tail lamps
>
Turn signal:
PY21W bulb, 21 watts
>
Brake lamp in the luggage compartment lid:
H21W bulb, 21 watts
>
Other lamps:
W16W bulb, 16 watts
The tail lamps are divided in two parts. One part
is in the luggage compartment lid, the other is in
the fender.
Online Edition for Part no. 01 41 0 014 699 - © 10/07 BMW AG
1
Turn signal
2
Roadside parking lamp/tail lamp, LED
3
Backup lamp
4
Brake lamp, consisting of two individual
bulbs
5
Two-stage brake lamp
6
Roadside parking lamp/tail lamp, LED
If the bulbs 2 and 6 malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Fender-mounted lamps
1.
Left-hand side: use a screwdriver to pry off
the cover in the cargo bay and remove the
cover.
Right-hand side: remove the cover from the
right-hand side panel of the cargo bay.
2.
Loosen the bulb holder at the clip, see
arrow, and pull out.
3.
Turn signal indicator: apply gentle pressure
to the bulb while turning it to the left for
removal and replacement.
Backup lamps and brake lamps: take out
the bulbs and change them.
211
Advertisement
Table of Contents
