Configuring The Onboard Sas/Sata Controller; Configuring The Onboard Cna Controller - Fujitsu PRIMERGY BX924 S3 Operating Manual

Storage" in chapter 6 under Industry Standard Servers - Software -
ServerView Suite - Out-Of-Band Management on the ServerView
Suite DVD 2).
6.3.3

Configuring the onboard SAS/SATA controller

A SAS/SATA controller is integrated on the system board. You can configure the
onboard controller either before or during installation with the ServerView
Installation Manager. Using the ServerView Installation Manager is
recommended.
I
The controller has its own configuration utility. For further information,
refer to the "Embedded MegaRAID Software User's Guide" (on the
ServerView Suite DVD 2 under Industry Standard Servers - Expansion Cards
- Storage Adapters - LSI SAS / SCSI RAID Controllers).
I
The SAS functionality needs to be enabled separately by using a ROM1
SCU Key.
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.html
(for the EMEA market).
http://jp.fujitsu.com/platform/server/primergy/downloads/
market).
I
In the system BIOS the onboard SAS/SATA controller can be configured
as "RAID" (default) or "non-RAID".
6.3.4

Configuring the onboard CNA controller

A CNA controller is integrated on the system board. You can configure the onboard
CNA controller either before or during installation with the ServerView Installation
Manager. Using the ServerView Installation Manager is recommended.
I
The onboard CNA controller has its own configuration utility. Please refer
the onboard CNA controller manuals as follows:
http://cmw3wbq1.emulex.com/downloads/fujitsu-technology-solutions.html
(for the EMEA market).
http://jp.fujitsu.com/platform/server/primergy/downloads/
market).
BX924 S3
Operating Manual
Starting up and operation
(for the Japanese
(for the Japanese
55