Configuring The Onboard Sas/Sata Controller; Configuring The Sas/Sata Raid Controller - Fujitsu PRIMERGY BX920 S3 Operating Manual

Storage" in chapter 6" under Industry Standard Servers - Software -
ServerView Suite - Out-Of-Band Management on the ServerView
Suite DVD 2).
6.3.3

Configuring the onboard SAS/SATA controller

A SAS/SATA controller is integrated on the system board. You can configure the
onboard controller either before or during installation with the ServerView
Installation Manager. Using the ServerView Installation Manager is
recommended.
I
The controller has its own configuration utility. For further information,
refer to the "Embedded MegaRAID Software User's Guide" (on the
ServerView Suite DVD 2 under Industry Standard Servers - Expansion Cards
- Storage Adapters - LSI SAS / SCSI RAID Controllers).
I
The SAS functionality needs to be enabled separately by using a ROM1
SCU key.
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.html
(for the EMEA market)
http://jp.fujitsu.com/platform/server/primergy/downloads/
market).
I
In the system BIOS the onboard SAS/SATA controller can be configured
as "RAID" (default) or "non-RAID".
6.3.4

Configuring the SAS/SATA RAID controller

The server blade has a SAS/SATA RAID controller with "MegaRAID
functionality". You can configure the SAS/SATA RAID controller either before or
during installation with the ServerView Installation Manager. Using the
ServerView Installation Manager is recommended.
I
A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User's
Guide" (on the ServerView Suite DVD 2 under Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI Configuration Software).
BX920 S3
Operating Manual
Starting up and operation
(for the Japanese
55