Setting Up Service; Setting Up Your Smart Device - HTC Touch Pro RAPH800 User Manual

Section 1A

Setting Up Service

Setting Up Your Smart Device (page 2)
Activating Your Device (page 4)
Setting Up Your Voicemail (page 5)
Sprint Account Passwords (page 6)
Getting Help (page 7)
Setting up and activating your new smart device is quick and easy.
steps to set up your device, activate your device's phone, set up your voicemail, establish passwords, and
contact Sprint for assistance with your Sprint service.

Setting Up Your Smart Device

When you take your device out of the box, install the battery, turn on the power, and complete the Quick Start
Wizard to prepare your device for use.
Note You can also insert a microSD™ card into your device. To learn how to insert a microSD card, see "Using a
microSD Card on Your Phone" on page 86.
Installing the Battery
1. Remove the back cover by following these steps:
Hold the device with both hands and the front panel facing down.
Push the back cover up with your thumb until it disengages from the device and then slide it up to
remove.
2 Section 1A. Setting Up Service
This section walks you through the necessary