System Menu Operations; Main System Menu - Boss Audio Systems BV7975 User Manual

System Menu Operations

Main System Menu

Long press the Menu (
button to access the System Menu mode, then
user can rotate to select the desired mode.
Menu items for selection:
System Setting
Preset EQ Setting
Display Setting
Image Setting Bluetooth Setting
System Setting
Under the System Setting menu, there are have
below options for selection:
Date Set To adjust the Date/Month/Year.
Clock Set To adjust the hour and minute.
To change the time format
Time
between "12H"and "24H".
Format
Date Set To adjust the Date/Month/Year.
Clock Set To adjust the hour and minute.
Audio Setting
Under the Audio Setting menu, there are have
below options for selection:
iX-Bass 1. Level:adjust the iXBASS level from
Low, Middle or High.
2. P .FREQ:adjust the iXBASS peak
frequency as 400Hz, 800Hz or
2.4KHz.
Sub-W
center vol button )
Bass
Audio Setting
Treble
Tuner Setting
Info Setting
Middle 1. Level:adjust the Middle level from
Balance
Fader
2-Zone
E 1 - 1
1. Level:Rotate Volume Knob to adjust
the Subwoofer lever from 00 to 12.
2. LPF:Rotate Volume Knob button to
adjust the Low pass filter (LPF) as
Flat, 80Hz, 120Hz or 160Hz.
1. Level:adjust the Bass level from
-06 to +06.
2.C.Freq:adjust the Bass center
frequency as 60Hz, 80Hz,100Hz,
or 200Hz.
3.Bass-q:adjust the Bass Quality Factor
as 2N,1N,1W or 2W.
1. Level:adjust the Treble level from
-06 to +06.
2. C.Freq:adjust the Treble center
frequency (C.FREQ) as 10KHz,
12.5KHz,15KHz, or 17.5KHz
-06 to +06.
2. C.Freq:adjust the Middle Range
center frequency as 500Hz,1KHz,
1.5KHz,or2.5KHz.
3. Mid.q:adjust the desired Middle
Quality Factor to 2N,1N,1W or 2W.
To adjust the Balance between the
right and left speakers from R12 to
L12. Balance Center for this unit is
Balance C00.
To adjust the Fader between the
front and rear speakers from R12 to
F12. Fader Center for this unit is
Fader C00.
1. If Front Zone 'F-Zone' is selected,
rotate the encoder knob to navigate
through different modes: Tunner
>BT are available for selection of
the Front Zone or AV output.
2. If Rear Zone 'R-Zone' is selected,
rotate the encoder knob to navigate
through different modes: Tunner
> MultiMedia > AV-1 > AV-2 > BT are
available for selection of the Rront
Zone or AV output.