Table of Contents
Advertisement
46 Getting Started
Use Numeric mode
If a text box permits a numeric entry only, such as a phone number, the input mode
automatically defaults to Numeric mode. However, if you need to enter numbers
within a line of text, change to Numeric mode, and then change back to Multipress
or XT9 mode to finish entering the text.
To enter numbers in text boxes
1.
Press and hold the *T9 key to change to Numeric mode (12#).
2.
On the keypad, enter the number or numbers you want.
3.
Change back to Multipress or XT9 input mode by pressing and holding the
*T9 key, and then finish entering your text.
More text entry tasks
In both Multipress and XT9 modes, the first letter of a sentence is by default
capitalized.
To change between uppercase, lowercase, and caps lock
Press the *T9 key to change between uppercase, lowercase, and caps lock within a
text input mode.
To delete characters
•
To backspace and delete a single character in any input mode,
press the BACK key.
•
To backspace and delete an entire text or numeric field in any input mode,
press and hold the BACK key.
To enter a space
In Multipress or XT9 mode, press the #_ key.
To enter a symbol
1.
Press and hold the *T9 key.
2.
On the menu, click Symbols to display the Symbol page.
3.
Select the symbol you want and press CENTER OK.
Advertisement
Table of Contents
