Installing The Sim Card, Battery, And Storage Card; Sim Card - HTC Tilt 2 User Manual

8 Getting Started

1.2 Installing the SIM Card, Battery, and Storage Card

You need to remove the back cover before you can install the SIM card, battery
and storage card. Also, make sure to always turn off the power before installing or
replacing the SIM card and battery.
To remove the back cover
1.
Make sure your device is turned off.
2.
Remove the stylus.
Note
3.
Firmly hold the device with both hands and the
front panel facing down.
4.
Push the back cover up with your thumbs until it
disengages from the device and then slide it up to
remove.

SIM card

The SIM card contains your phone number, service details, and phonebook/
message memory. Your device supports both 1.8V and V SIM cards.
Note
Some legacy SIM cards may not function with your device. You should consult with
your service provider for a replacement SIM card. There may be fees for this service.
To install the SIM card
1.
Remove the battery if it is installed.
2.
Locate the SIM card slot, then insert
the SIM card with its gold contacts
facing down and its cut-off corner
facing out the card slot.
3.
Slide the SIM card completely into
the slot.
You need to temporarily remove the stylus to be
able to remove or replace the back cover.
Cut-off
corner