Straight Talk; Starting A Conference Call From The Phone Screen - HTC Tilt 2 User Manual

4.
When the called party accepts the invitation, point the device's camera at
your subject. The called party receives the streaming live video.

2.6 Straight Talk™

Your device features Straight Talk™, a technology that integrates messaging, voice,
and conference calling, allowing you to seamlessly transition from a message to
a single call or multi-party conference call. With dual microphone and speaker
that enhance voice quality and reduce noise, Straight Talk turns your device into a
conference room speakerphone system.
Note
Make sure your SIM card is enabled with conference calling service. Contact your
wireless service provider for details.
This section shows how to make a conference call and use Straight Talk to transition
from email to the conference call. For more information about using Straight Talk
to switch from a message to a voice call, see "Making a call from a text message",
"Making a call from an email message", and "Making a call from a meeting request
or reminder" earlier in this chapter.

Starting a conference call from the Phone screen

There are two ways to start a conference call from the Phone screen. You can
choose your participants first before starting the conference call. You can also
directly dial calls and add each connected call to the conference call.
To select participants and start a conference call
1.
Press the TALK/SEND button to open the Phone screen.
2.
Tap
3.
Tap to close the phone keypad so you can finger-scroll and select from
contacts or phone numbers.
to switch the Phone screen to conference mode.
Using Phone Features 59