Installing The Sim Card, Battery, And Storage Card - HTC Touch Pro 2 Quick Start Manual

4. Installing the SIM Card, Battery, and Storage Card

You need to remove the back cover before you can install the SIM card, battery
and storage card. Also, make sure to always turn off the power before installing
or replacing the SIM card and battery.
To remove the back cover
Make sure your device is turned off.
1.
Remove the stylus.
2.
Note You need to temporarily remove the
stylus to be able to remove or replace
the back cover.
Firmly hold the device with both hands
3.
and the front panel facing down.
Push the back cover up with your thumbs
4.
until it disengages from the device and
then slide it up to remove.
SIM card
To install the SIM card
1.
Remove the battery if it is installed.
2. Locate the SIM card slot, then insert
the SIM card with its gold contacts
facing down and its cut-off corner
facing out the card slot.
3. Slide the SIM card completely into
the slot.
Quick Start Guide 7
Cut-off
corner