Oki ES5430 User Manual page 35

ITEM
SUBNET MASK
GATEWAY ADDRESS
WEB
TELNET
FTP
IPSEC
SNMP
NETWORK SCALE
HUB LINK SETTING
FACTORY DEFAULTS
SETTINGS
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ENABLE / DISABLE
ENABLE / DISABLE
ENABLE / DISABLE
ENABLE / DISABLE
ENABLE / DISABLE
NORMAL / SMALL
AUTO NEGOTIATE
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
EXECUTE
Menu functions > 35
EXPLANATION
Current assigned subnet mask. To change, proceed as
above.
Current assigned gateway address. To change, proceed
as above.
Enables or disables Web config. facility.
Enables or disables Telnet config. facility.
Enables or disables communication via FTP.
Sets Enable/Disable of IPSec. Enable via the web.
Enable: IPSec is available.
Disable: IPSec is not available.
Enables or disables SNMP protocol.
Selects network size.
When NORMAL is selected, printer can work effectively,
even when connected to a HUB that has a spanning
tree
feature. However, printer start up time gets longer
when computers are connected with two or three small
LANs.
When SMALL is selected, computers can cover from two
or three small LANs to a large LAN, but may not work
effectively when connected to a HUB that has a
spanning tree feature.
Sets full or half duplex for communication via a network
hub.
When AUTO is set, negotiation is done automatically.
Reloads the settings present when the unit was setup
by the manufacturer.