Sys Config Menu - Oki ES5430 User Manual

ITEM
CMYK CONVERSION
S
YS CONFIG MENU
This menu adjusts general printer settings to suit the way you prefer to work.
ITEMS
POW SAVE TIME
SLEEP TIME
PERSONALITY
USB PS-PROTOCOL
NET PS-PROTOCOL
CLRABLE WARNING
AUTO CONTINUE
MANUAL TIMEOUT
WAIT TIMEOUT
LOW TONER
SETTINGS
ON
OFF
SETTINGS
1 MIN
2 MIN
3 MIN
4 MIN
5 MIN
10 MIN
15 MIN
30 MIN
60 MIN
120 MIN
180 MIN
1 MIN
2 MIN
3 MIN
4 MIN
5 MIN
10 MIN
15 MIN
30 MIN
60 MIN
120 MIN
180 MIN
AUTO EMULATION
PCL
IBM PPR III XL
EPSON FX
PS3 EMULATION
RAW
ASCII
RAW
ASCII
ONLINE
JOB
ON
OFF
OFF
30 SEC
60 SEC
5~40 SEC~300, OFF
CONTINUE
STOP
Menu functions > 30
EXPLANATION
Setting to "OFF" will simplify the conversion process of
CMYK data, which will reduce the processing time.
This setting is ignored when Ink Simulation function is
used.
Note: This function only applies to PS models
EXPLANATION
Adjusts the idling time before the printer automatically
switches into power saving mode. In this mode power
consumption is reduced to a low level required to just
keep the printer operating and ready to receive data.
When a job is sent the printer will require a warm-up
time of up to 1 minute before printing can begin.
Adjusts the power saving time before the printer
automatically switches into sleep mode.
This item selects which industry standard emulation
your printer should use. When set to AUTO, incoming
data is examined and the correct emulation is
automatically selected each time a print job is received.
Selects PostScript data format for USB port.
Selects PostScript data format for network port.
When ONLINE, non-critical warnings, such as requests
for a different paper size, can be cleared by pressing the
ON LINE button. When set to JOB, they are cleared
when the print job resumes.
Determines whether or not the printer will automatically
recover from a memory overflow condition.
Specifies how many seconds the printer will wait for
paper to be fed before cancelling the job.
Specifies how many seconds the printer will wait when
received data pauses before forcing a page eject. In
PostScript Emulation mode the job will be cancelled if
timeout occurs.
Specifies whether the printer should continue printing
even after a low toner condition is detected.