Epson Stylus Photo 890 Basic Manual page 72

6. Click the Main tab, if
necessary. Select either
Premium Glossy Photo Paper
or
Photo Paper
Type setting, depending on
what type of roll paper you've
loaded. See page 37 for details
about selecting the correct
Media Type.
7. Click the
8. Select these settings:
Roll Paper
Source; this leaves a margin
of at least 0.12-inch
(3 mm) at the beginning
and end of the image
User Defined
Size; enter the size of your
document in the dialog box
that appears and name your
custom page size
Banner Mode
9. Click
OK
and Source settings are correct.
10. Click
OK
66
as the Media
tab.
Paper
as the Paper
as the Page
as the Roll Paper Option
If you want to print a cutting line at your page boundaries, select Cut
Sheet Mode, then click the Print page frame checkbox.
. You return to the Page Setup dialog box. Confirm that your Paper Size
again. You return to the Print dialog box.
Select Premium
Glossy Photo
Paper or Photo
Paper
Make sure
PhotoEnhance
is turned off
Select Roll
Paper
Select User
Defined, enter
your document
size, and name
the custom page
size
Select
Banner Mode