Printing with Windows
This section describes the basic steps for printing with Windows. (To print on a
Macintosh, see page 14.)
Loading Paper
1. Make sure your printer and
computer are turned on.
2. Slide the left edge guide to the
right until the space between
the left and right edge guides
is just a little wider than your
paper. Then load the paper
against the right edge guide.
3. Slide the left edge guide
against the paper.
Follow these guidelines when loading paper:
Load the printable side face up. It's usually whiter or brighter than the other side.
Load letterhead or preprinted paper into the printer top edge first.
Don't load paper above the arrow on the left edge guide.
8
See "Using Special EPSON Papers" on page 29 for instructions on
loading special media. For instructions on loading roll paper, see
page 42. For more details, see your electronic Reference Guide.
Don't load paper
Slide the left edge guide against the paper
above this arrow