Table of Contents
Advertisement
General Information
This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.
CAUTION
Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.
INSPECTION
UN-CRATING AND INSPECTING
Unpack the unit and components from the shipping container. Remove all visible packing material
and those from inside the cooking chamber. If damage is discovered, file a claim immediately with
the carrier that handled the shipment. Do not operate the unit if it was damaged during shipping. All
shipping containers should be checked for freight damage both visible and concealed. This unit has
been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is
received in damaged condition, either apparent or concealed, a claim must be made with the delivering
carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 5 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.
ASSEMBLY AND INSTALLATION
The unit was shipped fully assembled and ready to plug into a standard outlet specified for its voltage
and amp draw. If improper electrical supply is determined, contact a qualified electrician
prior to using the unit. Removal and replacement of the power cord and plug will void the warranty. For
assistance, contact your local authorized service agent for service or required maintenance.
Before using the unit for the first time, wipe down the exterior with a damp cloth.
Allow enough space around the toaster for adequate ventilation. Do not operate the unit without the
crumb tray properly positioned. Overheating and poor toasting may occur. Read all labels on the unit
and follow their instructions.
INSTALLATION
These models are equipped for the voltage and wattage indicated on the nameplate. The nameplate
is located on the back of the unit. These units are designed to operate on alternating current (A.C.),
two wire single phase service only and are equipped with an approved lead in cord set with a three
prong grounding type plug.
ELECTRICAL CONNECTION
Once the unit is in position, verirfy the electrical supply matches the units requirments, located on the
rear of the toaster.
DO NOT CONNECT TO ANY OTHER TYPE OF VOLTAGE OR THE MACHINE WILL BE
SERIOUSLY DAMAGED.
DO NOT USE FOREIGN OBJECTS TO REMOVE THE TOAST. DOING SO MAY CAUSE
WARNING
DAMAGE TO THE ELEMENTS OR POSSIBLE LOSS OF LIFE.
4
Advertisement
Table of Contents
