HP J3245A Installation And Configuration Manual page 43

Figure 2-1. The Main Menu
For a description of Main Menu features, refer to "Main Menu Features" on
page 2-4.
How To End a Console Session:
1. If you have not made configuration changes in the current session, go to
step 3.
2. Configuration changes requiring a reboot of the switch are indicated by
an asterisk (*) next to the configured item in the Configuration menu. (See
"Rebooting To Activate Configuration Changes" on page 2-11) If you have
made configuration changes that require a reboot of the switch in order
to take effect:
a. Return to the Main Menu.
b. Use the arrow keys ( [<] , [>] , [v] , and [^] ) to highlight Reboot Switch
in the Main Menu and press [Enter] to reboot.
3. Do one of the following:
• If you have accessed the switch through a direct connection from a
terminal device, exit from the terminal application.
• If you have accessed the switch through Telnet or a modem connec-
tion:
i. Return to the Main Menu.
ii. Highlight LOGOUT in the Main Menu and press [Enter].
Using the Console Interface
Starting and Ending a Console Session
2-3