HP J3245A Installation And Configuration Manual page 141

Figure 7-20. ABC Enabled With Default IP_IPX Option (No VLANs Configured)
N o t e
The broadcast limit (Bcast Limit) parameter in the ABC screen sets a global
broadcast limit value for all ports in the switch or selected VLAN (if VLANs
are configured). If you want to set broadcast limits on a per-port basis, you
arrow key to display the remaining ABC parameters. (If VLANs are
configured, these parameters already appear.) Then do one of the follow-
ing:
• If you enabled ABC for IP_IPX and pressed an arrow key (figure 7-20,
below):
i. If you want IP RIP broadcast control, then select the IP RIP
Control parameter and use the Space bar to select Yes.
ii. If you want IPX RIP/SAP broadcast control, select the IPX RIP/
SAP Control parameter and use the Space bar to select Yes.
iii. If you want to specify a different global broadcast limit for the
switch or selected VLAN (if VLANs are configured), select the
Bcast Limit parameter and type a value from 0 to 99. (A "0"
disables broadcast limits; 40 is the default setting.)
iv. Go to step 7 on page 7-37.
Advanced Concepts
Automatic Broadcast Control (ABC)
Note: This is the screen
layout when no VLANs are
configured. The screen has
a different appearance if
VLANs are configured.
7-35