HP J3245A Installation And Configuration Manual page 29

Installation
3. Mount the Switch
Table Mounting
Place the switch on a table or other horizontal surface. (No special tools are
necessary.)
Be certain to pick a sturdy table in an uncluttered area. You may want to secure
the switch's cables to the leg of the table to help prevent people from tripping
over them.
C a u t i o n
Make sure the air flow around the sides and back of the switch is not restricted.
Also, if an HP J2962A AdvanceStack Redundant Power Supply is installed,
make sure the air flow around the fan area of the RPS is not restricted.
Route the power cord(s) and data cables so that they will not create a tripping
hazard for people walking in the area of the switch installation.
1-15