HP PROLIANT ML330 G6 User Manual page 56

Remove the air baffle (on page 22).
4.
Using a T-15 Torx screwdriver, remove the hard drive cage blank.
5.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
Using four of the surplus T-15 screws located on the non-hot-plug hard drive expansion cage, install
6.
the non-hot-plug hard drives.
Connect the power and data cables to the non-hot-plug hard drive.
7.
Install the non-hot-plug hard drive expansion cage.
8.
Hardware options installation 56