Start-Up Instructions; Filling The Spa - Sundance Spas Solo Installation & Owner's Manual

fig. I
RED
BLK
US/Canada 240 VAC Caprio ST Models:
240 VAC, 3-Wire Connection (60 Hz)

7.0 Start-Up Instructions

Congratulations! You are now all set to get your new spa ready to
use. Simply follow this step-by-step procedure and, before long, you
will be enjoying your first glorious experience in your Portofino spa.
For best results, read each step in its entirety before proceeding
with that step. During power-up, the control panel will display a
series of start-up displays. Refer to section 9.0 (page 12) for addi-
tional information.

7.1 Filling the Spa

Clear all debris from the spa. Although the spa shell has been
polished at the factory, you may want to treat it with a specially
formulated spa cleaner and wax available from your dealer prior to
filling it.
Only spas with a smooth acrylic surface require waxing. It is not
necessary to wax spas with the textured Quarite™ surface. For
Solo models only - fill the spa with water from a garden hose until
the water level is just below the neck jets. Refer to section 14.1
(page 28). For Tango and Caprio models, fill until water level is
halfway up the filter skimmer. Refer to sections 14.2-14.3 (page 29).
RED
TB1
RED
1
BLK
BLK
2
to Circuit
Board
GRN
TB1
fig. J
1
2
GRN
All Export Models:
230-240 VAC, 3-Wire (50/60 Hz)
BLUE
BLUE
BROWN
BROWN
to Circuit
Board
9