Volume And Sound; Button Clicks; Error Tones; Ringer Volume - Avaya 9500 Series User Manual

17.7 Volume and Sound

This section covers controls that relate to volume and to the various sounds that your phone uses. These are in addition to
the available ringer controls
Button Click
·
112
Turn the phone menu key click on or off.

Error Tones

· 112
Turn the phone menu error tones on or off.

Ringer Volume

·
112
Adjust the volume of the ringer used by the phone.
Handset Volume
·
Adjust the incoming call volume heard through the phone's handset.
Headset Volume
·
Adjust the incoming call volume heard through a headset attached to the phone.
Speaker Volume
·
Adjust the incoming call volume heard through the phone's speaker.
Automatic Gain Control
·
Switch automatic gain control on or off.
Note: The system administrator can configure your phone to reset its volume after each call.

17.7.1 Button Clicks

While using the phone menus, the phone can provide a key press confirmation click sound. This can be disabled.
1. Press the MENU button.
2. Use the up and down
3. Press Select.
4. Use the up and down
5. Press Change to change the setting between On or Off.
6. When completed, press the Save soft key.
7. Press Back / Exit to exit the menus.
17.7.2 Error Tones
1. Press the MENU button.
2. Use the up and down
3. Press Select.
4. Use the up and down
5. Press Change to change the setting between On or Off.
6. When completed, press the Save soft key.
7. Press Back / Exit to exit the menus.
17.7.3 Ringer Volume
You can adjust the ringer volume while the phone is idle or while it is ringing.
1. With the phone idle or ringing, press the
+
2. Use the plus and
3. The display returns to normal after a few seconds.
9500 Series User Guide
IP Office
.
102
113
113
113
113
arrow keys to highlight Screen & Sound Options.
arrow keys to highlight Button Clicks.
arrow keys to highlight Screen & Sound Options.
arrow keys to highlight Error Tones.
–
minus keys to adjust the volume.
key.
Page 112
Issue 05d (05 April 2012)