NEC My Digi User Manual page 20

V. Hold & Switch
Switches between the active call and the one on hold call.
1. When call is incoming, press [SEND], then phone becomes answer mode. (If user selects 'Reject', then call is rejected.)
2. Press [Menu] then is has 'Drop & Answer / Hold & Answer / Reject' menus.
Select 'Hold & Answer' then the screen both display 'Active call' and 'Held call'
3. Press "Switch" then switches between the active and hold call.
※ Reject Waiting Call
User can reject an incoming call by pressing and holding "Reject"
- While in a call, user presses "Reject" , pop-up menu appears.
- User moves to the desired item and press[OK]
VI. Split
Lets user talk privately with one person from a conference call.
1. When the "Conference Call" states, select "Menu"
2. Press 'Navigation key' to move the desired call then press[OK]
※ To end a connected or held call etc.. press right softkey to select end a call option.
For ending a call, press [Menu] and select desired item then press [OK]
▶ It has 'End on call / End held call / End all call'
Basic Function
Basic Function
20