Status Icon - NEC My Digi User Manual

IV. Status Icon
Signal Strength Indicator
In Use
No Use
Call Forward
Bell
Vibrator
Vibrator then bell
Meeting mode
Street mode
Car mode
Concert mode
Message
Voice Message
MMS Message
Alarm
Roam
MMS/WAP Data
GPRS
Battery meter
Displays the strength of signal received by the phone
Appears when call is progressing
Appears when system signal is not received
Appears when call is forwarded
Appears in sub-LCD when bell is selected.
Appears when vibrate is selected
Appears when vibrate then bell is selected
Appears when the meeting mode is selected
Appears when the street mode is selected
Appears when the car mode is selected
Appears when the concert mode is selected
Appears when text message is received
Appears when voice message is received
Appears when MMS message is received
Appears when alarm is set to on
Appears when phone is outside of your home system.
Appears when phone is sending or receiving MMS/WAP data
Appears when GPRS is enabled
Indicates battery charged level. Full charging state
Low charging level , Required to charge immediately
Getting Started
,
10