NEC My Digi User Manual page 19

IV. Hold
User can place a current call on hold and accept an incoming call, or start a second call.
1. While in a call, press [ANS].
2. Select "Hold & Ans", then press [OK]
To return to the call, press "Switch"
※ While in a call, press [right soft key] then pop-up menu appears. It has "End on call / End held call / End all "
User can select follow items,
- End on call : Ends a call user put on hold.
- End held call : Ends current active call.
- End all : Ends all connected calls.
If supported by service provider, more people can take part in a call.
1. When call is incoming, press [SEND], then user phone answer mode.(If user select 'Reject' call is rejected.)
2. Press [Menu], then it has 'Drop & Answer / Hold & Answer / Reject' menus.
Select 'Hold & Answer', then the screen both display 'In call' and 'Held call'.
3. Press [Menu], then Select "Join"
4. User phone displays, active call indicator with the new active call.
Basic Function
Basic Function
19