Charmglow Stainless Steel Natural Gas Drop-In 4-Burner Grill Owner's Manual page 19

8"
6"
WARNING:
Do not install this unit into combustible
enclosures. Maintain a minimum
clearance of 36 inches (91 cm) between
all sides of grill and walls or other
combustible material. DO NOT use grill
under overhead unprotected combustible
construction.
Drop-in cutout dimensions for the Stainless
Steel Natural Gas Drop-In 4-Burner Grill:
Length
Width
Height
Front View
6"
The following are minimum dimensions
necessary to install the Charmglow Drop-In
grills.
The rotisserie motor is located on the left
side of the grill body. A minimum of
8 inches (20.3 cm) clearance is required
between the grill lid and any surrounding
material to allow for proper functioning of the
rotisserie motor.
A minimum of 6 inches (15.2 cm) clearance
is needed from the right side of the grill body
to non-combustible materials.
Side View
The following are minimum clearances nec-
essary around the Charmglow Drop-In Grills.
Rear Clearance:
- 6 inches (15.2 cm) to non-combustible
materials
- 36 inches (91.4 cm) to combustible
materials
32" (81.3 cm)
21" (53.3 cm)
7 3/4" (19.7 cm)
18