Setting The Gain; Detailed Shutter Settings - Sony Owner’s Guide Operational Manual

3-8 Setting the Gain

If the gain of the video amplifier of this camera is to be
switched using the gain switch of the RM-B150 Remote
Control Unit, the gain values for the corresponding switch
positions must be specified in advance.
Use the <GAIN ASSIGN> page of the USER
(OPERATION) menu.
<GAIN ASSIGN> page
< G A I N A S S I G N >
G A I N [ L ] : B 0 d B
[ M ] : 6 d B
[ H ] : 1 2 d B
Menu item Setting
GAIN [L] Gain value corresponding to the L position
of the gain switch
GAIN [M] Gain value corresponding to the M position
of the gain switch
GAIN [H] Gain value corresponding to the H position
of the gain switch
Any of –6, –3, 0, 3, 6, 9, or 12 dB can be set for each of the
L, M, and H positions, in any sequence.
3-9 Detailed Shutter
Settings
The Electronic Shutter function of this camera enables
shooting with various shutter angles and shutter speeds
(sec).
While the basic settings of the shutter can be made on the
subdisplay, the <SHUTTER/FPS> page of the USER
(PAINT) menu permits you to set the shutter while
observing the shutter angle, the shutter speed (sec), and the
U 1 4 frame rates at a glance.
<SHUTTER/FPS> page
SHUTTER
To activate the electronic shutter, set this to ON.
The currently selected shutter angle is displayed in the
[deg] column. In the [sec] column, the speed (sec)
converted according to the selected frame rate is displayed.
STEP (Step mode)
To select a value registered as a step shutter, move the
cursor on this line.
Turn the MENU SEL/ENTER dial to display a registered
shutter value in the [deg] and [sec] columns one after
another in order.
CONTINUOUS (Continuous mode)
To fine-adjust the selected step shutter value or use a value
that has not been registered as a step shutter, move the
cursor on this line.
The values in the [deg] and [sec] columns will change
continuously when the MENU SEL/ENTER dial is turned.
STEP ASSIGN
Addition and deletion of step shutter values can be
performed in the same way as with the SHUTTER
ASSIGN page (see page 31) of the USER (OPERATION)
menu.
• ADD
For registering a shutter value displayed in the [deg]
column in Continuous mode as a new step shutter value. If
eight step shutter values have been already registered,
< S H U T T E R / F P S > U 1 9
S H U T T E R : O N
B
[ d e g ] [ s e c ]
1 8 0 . 0 ( 1 / 4 7 . 9 6 )
S T E P
C O N T I N U O U S
S T E P A S S I G N
A D D D E L E T E
F R A M E R A T E : ( 2 4 ) F P S
C O M P M O D E : O F F
Setting the Gain / Detailed Shutter Settings
49