Using The Arri Remote Control - Sony Owner’s Guide Operational Manual

Using the ARRI Remote
Control
You can set the shutter angle, FPS and start/stop recording/
playback from the ARRI-made WRC-2 (Wireless Remote
Control 2).
FPS can be continuously changed even while operation is
in progress (manual Ramp or programmable Ramp).
The system format, input voltage to the camera, and tape
remaining of the recorder can be observed on the WRC-2.
Connection and preparations
Two types of connection are permitted: direct wiring to the
EXT I/O connector of the camera and wireless connection
via the UMC-3 (Universal Motor Controller).
In either case, a special cable is required.
Version updating and modification for 12 V power are also
required on the WRC-2 and UMC-3.
For details on ARRI products, contact ARNOLD &
RICHTER CINE TECHNIK.
100

Using the ARRI Remote Control