Configuring the Handset
You can configure the phone using one of two methods:
1. The Features and User settings menus on the phone:
2. The WebUI, which you access using your Internet browser.
This section describes settings you can change using your handset. For
information about settings you can change on the WebUI, see "WebUI" on page
39.
Setting do not disturb
When Do Not Disturb (DND) is on for a line, calls to that line will be rejected.
To turn DND on or off:
1. Press MENU.
2. Press
to scroll to Features and press SELECT.
q
3. With DND highlighted, press SELECT.
4. Press p or q to select which line DND should apply to*,
then press SELECT to turn it on or off.
5. Press
SET
* Note that DND will apply to all handsets assigned the line.
Setting call forwarding
Calls can be forwarded to another phone number always, only when busy, or
after a set number of rings.
To set call forward:
1. Press MENU.
2. Press
to scroll to Features and press SELECT.
q
3. Press
to scroll to Call forward and press SELECT.
q
4. Press p or q to select which line Call forward should apply to*, then press
SELECT.
5. Press
to highlight the desired option:
q
•
Always
•
Busy
•
No answer
6. Press SELECT.
to save.
33